:: GREASE GUN ACCESSORIES ::
(35-301) Bulk Loaders | :: GREASE GUN ACCESSORIES ::
(35-311) Bulk Loaders |
:: GREASE GUN ACCESSORIES ::
(35-321) Bulk Loaders |
 |
 |
 |
 Heavy duty steel machined component use for filling the grease on grease gun with Grease gun filler.
| For most hand grease gun only. | Zinc plated finish. | Built in ball check valve. |
| |
Available in three (Male) size with | 9 mm (Taper). 14.7mm (Taper), 9mm (Straight.) | |
Heavy duty steel machined component use for filling the grease on grease gun with Grease gun filler. | For most hand grease gun only. | Zinc plated finish. | Built in ball check valve. |
| |
Available in three (Male) size with | 9 mm (Taper). 14.7mm (Taper), 9mm (Straight.) | |
Heavy duty steel machined component use for filling the grease on grease gun with Grease gun filler. | For most hand grease gun only. | Zinc plated finish. | Built in ball check valve. |
| |
Available in three (Male) size with | 9 mm (Taper). 14.7mm (Taper), 9mm (Straight.) | |
=========================================================================================================================================================== |
:: GREASE GUN ACCESSORIES ::
(35-325) Air Bleeder | :: GREASE GUN ACCESSORIES ::
Rigid Extension |
:: GREASE GUN ACCESSORIES ::
Rigid Extension With Hydraulic Coupler |
 |
 |
 |
Spare bleeder fitting for grease gun. | Use for vent air pocket in grease guns. |
|
Heavy steel construction with chrome or Zinc plated finish.
| 6” or 4” length pipe replacement for hand operated grease gun only.
| Fine or sharp thread on both ends.
| Pressure recommended 10000psi.
|
15deg. bent on one side. |
CAT NO Bent |
CAT NO Straight |
Length |
Thread |
35-101 |
35-113 |
6" |
1/8 BSPT |
35-102 |
35-114 |
6" |
M10x1 |
35-103 |
|
6" |
1/8"NPT |
| |
|
4" |
1/8"NPT |
|
|
Heavy steel construction with chrome or Zinc plated finish.
| 6” or 4” length pipe replacement for hand operated grease gun only.
| Fine or sharp thread on both ends.
| Pressure recommended 6000psi.
|
15deg. bent on one side.
| With hydraulic coupler. |
CAT NO Bent |
CAT NO Straight |
Length |
Thread |
35-121 |
|
6" |
1/8 BSPT |
35-122 |
|
6" |
M10x1 |
35-123 |
35-133 |
6" |
1/8"NPT |
| |
35-134 |
4" |
1/8"NPT |
|
|
|
|
 |
